openbcm

Git mirror of https://github.com/Broadcom-Network-Switching-Software/OpenBCM
git clone git://git.finwo.net/mirror/broadcom/openbcm
Log | Files | Refs | README

tscmod_functions.h (5308B)

      1 /*----------------------------------------------------------------------
      2  * 
      3  * This license is set out in https://raw.githubusercontent.com/Broadcom-Network-Switching-Software/OpenBCM/master/Legal/LICENSE file.
      4  * 
      5  * Copyright 2007-2019 Broadcom Inc. All rights reserved.
      6  *
      7  * Broadcom Corporation
      8  * Proprietary and Confidential information
      9  * All rights reserved
     10  * This source file is the property of Broadcom Corporation, and
     11  * may not be copied or distributed in any isomorphic form without the
     12  * prior written consent of Broadcom Corporation.
     13  *---------------------------------------------------------------------
     14  * Description: string defines  for tier1 and tier2 selectors
     15  *-----------------------------------------------------------------------*/
     16 
     17 #ifndef _FUNCTIONS_H_
     18 #define _FUNCTIONS_H_
     19 
     20 /* These are the Tier1 functions */
     21 
     22 /* special handle for MDK */
     23 #define TSCMOD_INIT              "TSCMOD_INIT"
     24 
     25 #define MASTER_SLAVE_CONTROL     "MASTER_SLAVE_CONTROL"
     26 #define SLAVE_WAKEUP_CONTROL     "SLAVE_WAKEUP_CONTROL"
     27 #define CREDIT_SET               "CREDIT_SET"
     28 #define ENCODE_SET               "ENCODE_SET"
     29 #define DECODE_SET               "DECODE_SET"
     30 #define CREDIT_CONTROL           "CREDIT_CONTROL"
     31 #define AFE_RESET_ANALOG         "AFE_RESET_ANALOG"
     32 #define AFE_RXSEQ_START_CONTROL  "AFE_RXSEQ_START_CONTROL"
     33 #define AFE_SPEED_UP_DSC_VGA     "AFE_SPEED_UP_DSC_VGA"
     34 #define TX_LANE_CONTROL          "TX_LANE_CONTROL"
     35 #define RX_LANE_CONTROL          "RX_LANE_CONTROL"
     36 #define RX_LOOPBACK_PCSBYP       "RX_LOOPBACK_PCS_BYPASS"
     37 #define PCS_BYPASS_CTL           "PCS_BYPASS_CTL"
     38 #define TX_TAP_CONTROL           "TX_TAP_CONTROL"
     39 #define TX_PI_CONTROL            "TX_PI_CONTROL"
     40 #define TX_AMP_CONTROL           "TX_AMP_CONTROL"
     41 #define RX_P1_SLICER_CONTROL     "RX_P1_SLICER_CONTROL"
     42 #define RX_M1_SLICER_CONTROL     "RX_M1_SLICER_CONTROL"
     43 #define RX_D_SLICER_CONTROL      "RX_D_SLICER_CONTROL"
     44 #define REFCLK_SET               "REFCLK_SET"
     45 #define ASYMMETRIC_MODE_SET      "ASYMMETRIC_MODE_SET"
     46 #define SPD_INTF_CONTROL         "SPD_INTF_CONTROL"
     47 /* put an _ since this begins with a number */
     48 #define _100FX_CONTROL           "100FX_CONTROL"
     49 #define TX_LANE_DISABLE          "TX_LANE_DISABLE"
     50 #define DUPLEX_CONTROL           "DUPLEX_CONTROL"
     51 #define POWER_CONTROL            "POWER_CONTROL"
     52 #define AUTONEG_SET              "AUTONEG_SET"
     53 #define AUTONEG_GET              "AUTONEG_GET"
     54 #define AUTONEG_CONTROL          "AUTONEG_CONTROL"
     55 #define AUTONEG_PAGE_SET         "AUTONEG_PAGE_SET"
     56 #define ANEG_CONTROL             "ANEG_CONTROL"
     57 #define CARRIER_EXTENSION        "CARRIER_EXTENSION"
     58 #define REG_READ                 "REG_READ"
     59 #define REG_WRITE                "REG_WRITE"
     60 #define PRBS_CHECK               "PRBS_CHECK"
     61 #define CJPAT_CRPAT_CONTROL      "CJPAT_CRPAT_CONTROL"
     62 #define CJPAT_CRPAT_CHECK        "CJPAT_CRPAT_CHECK"
     63 #define TSCMOD_DIAG               "TSCMOD_DIAG"
     64 #define LANE_SWAP                "LANE_SWAP"
     65 #define PARALLEL_DETECT_CONTROL  "PARALLEL_DETECT_CONTROL"
     66 #define CLAUSE_72_CONTROL        "CLAUSE_72_CONTROL"
     67 #define PLL_SEQUENCER_CONTROL    "PLL_SEQUENCER_CONTROL"
     68 #define PLL_LOCK_WAIT            "PLL_LOCK_WAIT"
     69 #define PROG_DATA                "PROG_DATA"
     70 #define REVID_READ               "REVID_READ"
     71 #define RX_SEQ_CONTROL           "RX_SEQ_CONTROL"
     72 #define SET_POLARITY             "SET_POLARITY"
     73 #define SET_AER                  "SET_AER"
     74 #define SET_PORT_MODE            "SET_PORT_MODE"
     75 #define SET_AN_PORT_MODE         "SET_AN_PORT_MODE"
     76 #define PRBS_CONTROL             "PRBS_CONTROL"
     77 #define PRBS_MODE                "PRBS_MODE"
     78 #define PRBS_SEED_A1A0           "PRBS_SEED_A1A0"
     79 #define PRBS_SEED_A3A2           "PRBS_SEED_A3A2"
     80 #define PRBS_SEED_LOAD_CONTROL   "PRBS_SEED_LOAD_CONTROL"
     81 #define PRBS_DECOUPLE_CONTROL    "PRBS_DECOUPLE_CONTROL"
     82 #define SCRAMBLER_CONTROL        "SCRAMBLER_CONTROL"
     83 #define RX_PF_CONTROL            "RX_PF_CONTROL"
     84 #define RX_DFE_TAP1_CONTROL      "RX_DFE_TAP1_CONTROL"
     85 #define RX_DFE_TAP2_CONTROL      "RX_DFE_TAP2_CONTROL"
     86 #define RX_DFE_TAP3_CONTROL      "RX_DFE_TAP3_CONTROL"
     87 #define RX_DFE_TAP4_CONTROL      "RX_DFE_TAP4_CONTROL"
     88 #define RX_DFE_TAP5_CONTROL      "RX_DFE_TAP5_CONTROL"
     89 #define RX_VGA_CONTROL           "RX_VGA_CONTROL"
     90 #define SOFT_RESET               "SOFT_RESET"
     91 #define AER_LANE_SELECT          "AER_LANE_SELECT"
     92 #define SET_SPD_INTF             "SET_SPD_INTF"
     93 #define TX_BERT_CONTROL          "TX_BERT_CONTROL"
     94 #define RX_LOOPBACK_CONTROL      "RX_LOOPBACK_CONTROL"
     95 #define TX_LOOPBACK_CONTROL      "TX_LOOPBACK_CONTROL"
     96 #define PORT_STAT_DISPLAY        "PORT_STAT_DISPLAY"
     97 #define CORE_RESET               "CORE_RESET"
     98 #define WAIT_PMD_LOCK            "WAIT_PMD_LOCK"
     99 #define HGSOLO                   "HGSOLO"
    100 #define MISC_CONTROL             "MISC_CONTROL"
    101 #define FIRMWARE_SET             "FIRMWARE_SET"
    102 #define UC_SYNC_CMD              "UC_SYNC_CMD"
    103 #define FWMODE_CONTROL           "FWMODE_CONTROL"
    104 #define FEC_CONTROL              "FEC_CONTROL"
    105 #define HIGIG2_CONTROL           "HIGIG2_CONTROL"
    106 #define EEE_PASS_THRU_SET        "EEE_PASS_THRU_SET"
    107 
    108 /* These are the Tier2+ functions */
    109 #define SPD_INTF_SET                    "SPD_INTF_SET"
    110 #define PRBS_ENABLE           "PRBS7_ENABLE"
    111 #define PRBS_DISABLE           "PRBS_DISABLE"
    112 /*PRBS_CHECK is also a Tier2 function */
    113 
    114 #endif