openbcm

Git mirror of https://github.com/Broadcom-Network-Switching-Software/OpenBCM
git clone git://git.finwo.net/mirror/broadcom/openbcm
Log | Files | Refs | README

BCM958625HR.bcm (1026B)

      1 # 
      2 # This license is set out in https://raw.githubusercontent.com/Broadcom-Network-Switching-Software/OpenBCM/master/Legal/LICENSE file.
      3 # 
      4 # Copyright 2007-2019 Broadcom Inc. All rights reserved.
      5 
      6 pbmp_valid.0=0x0000013f
      7 # internal GPHY
      8 phy_sys_interface_ge4.0=1
      9 # SGMII mode
     10 phy_sys_interface_ge5.0=4
     11 phy_fiber_pref=1
     12 phy_port_primary_and_offset_ge0=0x0000
     13 phy_port_primary_and_offset_ge1=0x0001
     14 phy_port_primary_and_offset_ge2=0x0002
     15 phy_port_primary_and_offset_ge3=0x0003
     16 phy_port_primary_and_offset_ge4=0x0004
     17 
     18 ## ==== MacSec Section ==== ##  
     19 macsec_enable = 1
     20 
     21 #MACSEC device address. MACSEC devices address, used to adress MACSEC core.
     22 #This is MDIO address that is being assigned to MACSEC core. The MDIO address
     23 #gets programmed to MACSEC PHY during initialization if MACSEC is enabled.
     24 macsec_dev_addr_ge4=0x21B
     25 macsec_dev_addr_ge5=0x21A
     26 
     27 #A MACSEC phy could be an integrated PHYs with multiple ports. This property
     28 #is needed to identify the index of each PHY port.
     29 macsec_port_index_ge4=0
     30 macsec_port_index_ge5=0