openbcm

Git mirror of https://github.com/Broadcom-Network-Switching-Software/OpenBCM
git clone git://git.finwo.net/mirror/broadcom/openbcm
Log | Files | Refs | README

link.h (2922B)

      1 /*
      2  * 
      3  * This license is set out in https://raw.githubusercontent.com/Broadcom-Network-Switching-Software/OpenBCM/master/Legal/LICENSE file.
      4  * 
      5  * Copyright 2007-2019 Broadcom Inc. All rights reserved.
      6  * 
      7  * Common internal definitions for BCM Linkscan module
      8  */
      9 
     10 #ifndef _BCM_INT_LINK_H_
     11 #define _BCM_INT_LINK_H_
     12 
     13 #include <sal/types.h>
     14 #include <bcm/types.h>
     15 #include <bcm/debug.h>
     16 #include <bcm/link.h>
     17 #include <soc/types.h>
     18 
     19 #define NUM_PORTS    SOC_MAX_NUM_PORTS
     20 
     21 /*
     22  * Driver specific routines
     23  *
     24  * (See description for routines below)
     25  */
     26 typedef struct _bcm_ls_driver_s {
     27     void (*ld_hw_interrupt)(int, bcm_pbmp_t*);
     28     int  (*ld_port_link_get)(int, bcm_port_t, int, int*);
     29     int  (*ld_internal_select)(int, bcm_port_t);
     30     int  (*ld_update_asf)(int, bcm_port_t, int, int, int);
     31     int  (*ld_trunk_sw_failover_trigger)(int, bcm_pbmp_t, bcm_pbmp_t);
     32 } _bcm_ls_driver_t;
     33 
     34 /*
     35  * Driver specific routines description
     36  *
     37  * Function:
     38  *     ld_hw_interrupt
     39  * Purpose:
     40  *     Routine handler for hardware linkscan interrupt.
     41  * Parameters:
     42  *     unit - Device unit number
     43  *     pbmp - (OUT) Returns bitmap of ports that require hardware re-scan
     44  *
     45  *
     46  * Function:
     47  *     ld_port_link_get
     48  * Purpose:
     49  *     Return current PHY up/down status.
     50  * Parameters:
     51  *     unit - Device unit number
     52  *     port - Device port number
     53  *     hw   - If TRUE, assume hardware linkscan is active and use it
     54  *              to reduce PHY reads.
     55  *            If FALSE, do not use information from hardware linkscan.
     56  *     up   - (OUT) TRUE for link up, FALSE for link down.
     57  *
     58  *
     59  * Function:
     60  *     ld_internal_select
     61  * Purpose:
     62  *     Select the source of the CMIC link status interrupt
     63  *     to be the Internal Serdes on given port.
     64  * Parameters:
     65  *     unit - Device unit number
     66  *     port - Device port number
     67  *
     68  *
     69  * Function:
     70  *     ld_update_asf
     71  * Purpose:
     72  *     Update Alternate Store and Forward parameters for a port.
     73  * Parameters:
     74  *     unit   - Device unit number
     75  *     port   - Device port number
     76  *     linkup - port link state (0=down, 1=up)
     77  *     speed  - port speed
     78  *     duplex - port duplex (0=half, 1=full)
     79  *
     80  *
     81  * Function:
     82  *     ld_trunk_sw_failover_trigger
     83  * Purpose:
     84  *     Remove specified ports with link down from trunks.
     85  * Parameters:
     86  *     unit        - Device unit number
     87  *     pbmp_active - Bitmap of ports
     88  *     pbmp_status - Bitmap of port status
     89  */
     90 
     91 extern int _bcm_linkscan_init(int unit, const _bcm_ls_driver_t *driver);
     92 
     93 extern int _bcm_link_get(int unit, bcm_port_t port, int *link);
     94 extern int _bcm_link_force(int unit, bcm_port_t port, int force, int link);
     95 
     96 extern int _bcm_linkscan_pause(int unit);
     97 extern int _bcm_linkscan_continue(int unit);
     98 extern int _bcm_linkscan_available(int unit);
     99 extern int _bcm_linkscan_port_init(int unit, int port);
    100 
    101 #ifdef BCM_WARM_BOOT_SUPPORT
    102 int bcm_linkscan_sync(int unit, int sync);
    103 #endif
    104 #endif /* _BCM_INT_LINK_H_ */